emulsion breaking
英 [ɪˈmʌlʃn ˈbreɪkɪŋ]
美 [ɪˈmʌlʃn ˈbreɪkɪŋ]
破乳；乳胶分解；反乳化
双语例句
- With the introduction of ultrasonic wave emulsion breaking technology, salt content in desalted crude oil can be efficiently controlled within the salt standard.
应用超声波破乳技术可将原油脱后含盐量有效控制在达标范围内。 - Study on Recovering Waste Oil from Oily Sludge Using Demulsifier Assisted Ultrasound Application of ultrasonic emulsion breaking technology in electrostatic desalting process
破乳剂辅助超声波回收含油污泥中污油的研究超声波破乳技术在电脱盐工艺中的应用 - The correlation between lube oil emulsion breaking test methods is investigated through a lot of experiments, to supply a scientific basis for the simplification of test method and test apparatus.
通过大量试验，考察了润滑油破乳化试验方法的相关性，为简化试验方法和试验仪器提供科学依据。 - Mechanism and method of emulsion Off-stability and breaking analysis with theory of collold chemistry and emulsion
基于胶体化学和乳状液理论分析乳状液脱稳破乳机理及方法 - The effect and feasibility of the rotational electrolysis coacervation technology applied to emulsion breaking of emulsion wastewater from metal machining is investigated by experiments.
研究转动式电凝聚技术用于乳化液破乳处理的效果和可行性。 - At the same time has analyzed the emulsion breaking basic principle and has carried on the emulsion breaking dehydration experiment, inspected the emulsion breaker increment, the emulsion breaking temperature, stirs factor and speed to the emulsion breaking dehydration experiment influence.
同时分析了破乳基本原理和进行了破乳脱水实验，考察了破乳剂加量，破乳温度，搅拌速率等因素对破乳脱水实验的的影响。 - Development and application of crude oil emulsion-breaking agent Pel-01
高含聚合物原油破乳剂Pel-01的研制及应用 - Study on the combined treatment of high concentration of organic wastewater using emulsion breaking and Fenton oxidation
用破乳&Fenton氧化联合处理高浓度有机废水的研究 - Under heat insulated condition, the temperature of prepared emulsion is higher and therefore velocity of emulsification is faster. But if temperature is too high emulsion breaking can be induced, so choice of appropriate temperature is important for emulsification of diesel oil.
保温条件下制得的乳液温度高，乳化速率快，但乳化温度过高乳液易破乳，因此制备柴油乳液时需选择合适的乳化温度。 - This article analyses the main reasons for the emulsification of running turbine oil and ts mechanism, and presents the metheds of emulsion type identification and emulsion breaking.
分析运行中汽轮机油乳化的根本原因和乳化机理，介绍乳化液类型的鉴别和破乳化方法。 - Experiment shows that to polyether initiator, crude emulsion breaking has definite selectivity.
试验证明：原油破乳对聚醚引发剂有一定的选择性。 - The microfiltration membrane demulsification technique has the merits of high separation efficiency, low energy consumption, no pollution, relatively simple installment, broad versatility and so on, compared with the traditional emulsion breaking technology.
膜破乳技术相对于传统的破乳技术具有分离效率较高，能耗较低，不添加任何试剂污染原体系，装置相对简单，通用性较强等优点。 - It was suggested that a water-in-oil homogeneous micro-emulsion system was formed at the stage of saponification of the complex extraction process, and complex extraction was found the process of emulsion breaking.
认为络合萃取过程中的皂化是形成了油包水的微乳状液均相体系，而络合萃取是微乳状液的破乳过程。 - This paper aims at procedure during the processing of organic fluorine coating and according to the principle that the metal ion has the function of emulsion breaking, to discuss the waste water treatment method-sedimentation and then evaporation drying with domestic existing polymer flocculating agents.
本文针对有机氟涂料生产过程中最后的调和工序所产生的洗涤废水，根据金属离子可以起破乳作用的原理，探讨以国内现有高分子絮凝剂对废水先沉降处理，再蒸发干化的处理方法。 - Synthetic methods for polyurethane emulsion leather paint agent and polyurethane emulsion petroleum emulsion breaking agents are described.
本文阐述了聚氨酯乳液皮革涂饰剂和聚氨酯乳液高分子石油破乳剂的合成方法。 - Emulsion breaking and dehydration of heavy tar oil from regenerative cracking furnace
蓄热炉重质焦油破乳脱水的试验研究 - Influences of temperature, concentration of electrolyte and stirring time on emulsion breaking and dehydration are investigated.
考察了湿度、电解质浓度、搅拌时间等因素对破乳脱水的影响。 - Study on Emulsion Breaking Dehydration of Tar by Gas Phase Let-off Method
气相导出法焦油破乳脱水的试验研究 - The best characteristic parameter of emulsifies including the determination of the ultra thick oil, the goal active ingredient host medicinal preparation determination synthesis, optimal appraisal technology and to following emulsion breaking influence factor research.
包括超稠油乳化最佳特征参数的测定，目标活性剂主剂的确定合成，优选评价技术和对后续破乳影响因素的研究。 - The results indicate that the post-treatment process is feasible, which involves using coagulating reagent for emulsion breaking and using centrifuge for separating PVDF. The coagulation effectiveness is obvious; the diameters of the coagulated particles ranges from 28 to 32 fun.
结果表明，用凝聚剂破乳、离心分离的PVDF乳液后处理工艺是可行的，凝聚效果明显，凝集粒径达到了28&32μm； - A Research on the Characteristics of Electrolyte Emulsion Breaking
电解质破乳特性研究 - The core-shell emulsion polymerization reduced the breaking strength obviously.
核-壳乳液聚合明显降低了胶膜断裂强度。 - The object of the subject is waste emulsion by the physical and chemical emulsion of breaking, the COD value reach up to tens of thousand, the composition is complicated, and difficult to break down, our country delimits that it is hazardous waste.
本课题研究的是经物化破乳后的废乳化液，其COD值高达几万，成分复杂，难降解，国家列其为危险废弃物。 - The result showed that both of these two microemulsion systems had excellent extraction effect on europium, like short balance time, high extraction efficiency, stable phase, and there was not emulsion breaking happen with high aqueous-microemulsion ratio.
结论得出，这两种微乳液体系对铕都有很好的萃取效果，如：平衡时间短，萃取效率高，微乳相稳定，在较大水乳比的情况下依然没有破乳等。